Tiling is always stylish, making the facade of any house original and unique. Tile, ceramic, or stone also complement interior finishes. Modern wet tile cutters greatly speed up the tile working process, improve the cut quality, and minimize waste. Electric wet cut tile saws are used to make angled cuts, cut tiles diagonally, and make incisions. They are used with various materials from thin ceramic tile to large natural stone. With such a tool, the cut line is smooth, and the chance of chipping is minimal.
In this article, I will compare the best-wet tile saws so that you can choose and buy the best tool for working with ceramic, porcelain tile when tiling rooms and facades.
7 Best Wet Tile Saws
Contents
I have prepared this wet tile saw a comparison to describe the best models of the tool. Read about the specs, pros, and cons of the best 7 items on the current market.
1. DEWALT 10″ — Best Wet Tile Saw with Stand
Specifications:
- Blade Length: 10 Inches
- Speed: 4200 RPM
- Bevel Capacity: 45ᵒ
- Power Source: Battery Powered
- Voltage: 120 Volts
- Cutting Capacity: Diagonal Cut Capacity 18” x 18”. Max depth cut – 3 1/8”. Max Rip Capacity with Plunge – 28”.
- Warranty: 1-year limited warranty on tool
DEWALT Wet Tile Saw combines the advantages of each saw I will describe below. The renowned company produces tools of top-notch quality, and this model of wet tile saw is no exception. This is a professional saw with a 24-inch high stand. The length and width of the unit are 36 x 24 inches, respectively.
This tool comes with a 10-inch Dewalt wet tile saw, wet tile saw stand, 10-inch XP4 porcelain tile blade, submersible pump, water pan, side water pan, rear water pan, side cutting cart extension, angle/break guide, and a wrench. The saw’s peak engine power is 1.5 hp, which is one of the best.
What’s included:
- Bare-tool
- Manual
- Porcelain Tile Blade
- Reliable fixation of the working surface of the floor or table.
- To collect dust, you can connect a vacuum cleaner to the special connector near the drive.
- Convenient longitudinal tile clamps that fix it.
- Not suitable for large-sized tiles.
2. SKIL 3540-02 — Best Low-Cost 7″ Wet Tile Saw
Specifications:
- Blade Length: 7 Inches
- Speed: 3600 RPM
- Bevel Capacity: 0 to 45 degrees
- Cut Material: Stone/Masonry
- Power Source: Corded Electric
- Voltage: 120 Volts
- Cutting Capacity: Cross – 7.75 in, diagonal – 7.25 in
- Warranty: 3 year warranty
SKIL 3540-02 is the best 7-inch wet tile saw at a budget price. This mini tile saw has a compact size of 18 x 14.5 x 7.75 inches. You can place the saw on your workshop workbench or directly on the floor.
There is a reservoir under the work surface that needs to be filled with water. Change the water periodically to keep it from overheating and becoming dirty. Natural water cooling is effective on non-thick ceramic tiles and porcelain tiles.
What’s included:
- SKIL 3540 7-Inch Wet Tile Saw
- 7-inch Diamond Blade
- Blade Guard
- Blade Wrenches
- Cutting blade angle adjustment up to 45 degrees;
- Stop for tile fixation;
- Coolant reservoir.
- Not suitable for large-sized tiles.
3. Delta 7″ Cruzer — Functional Sliding Wet Tile Saw
Specifications:
- Blade Length: 7 Inches
- Speed: 5300 RPM
- Bevel Capacity: 45ᵒ
- Power Source: Ac/dc
- Voltage: 120 Volts
- Cutting Capacity: RIP – 24″, DIAGONAL – 24″, DEPTH 2-3/8
- Warranty: 1 Year Manufacturer
Delta 96-107 7″ Cruzer is a reliable professional sliding wet tile saw. The basic version contains only the working surface with a saw and water cooling system. You can choose the improved version with a stand or the 10-inch wet tile saw of the same model line.
With this tool, you can cut tiles up to 24 inches long. The maximum thickness of tiles to be cut is 2-3 / 8 inches.
What’s included:
- Delta 7″ Cruzer
- Manual
- Diamond Cutting Wheel
- Rails for smooth cutting blade travel;
- Can cut tiles up to 24″ long;
- Effective water cooling.
- The stand is not included in the price.
4. PORTER-CABLE — Powerful Tabletop Wet Tile Saw
Specifications:
- Blade Length: 7 Inches
- Speed: 2850 RPM
- Bevel Capacity: 45ᵒ
- Power Source: Corded Electric
- Voltage: 120 Volts
- Warranty: 3-year
PORTER-CABLE PCE980 is a wet tile saw with a simple and reliable control system. The tool is designed to work with a workpiece with a length of 1020 mm. The machine is capable of cutting tiles 12″ X 12″ diagonally. It features a potent 1 hp motor that works at 2850 RPM. The device is suitable for cutting facade materials, granite slabs, paving tiles, and other types of tiles. The dimensions of the tool are 26.9 x 22.7 x 8.9 inches. You don’t need to purchase a stand for the additional cost, as the saw is sold as a whole unit. It has a low height, so you will be able to adjust it to your workshop table or right on the floor for better stability.
This tool has many details for comfortable and practical work. For example, there is a splash guard to protect the operator from splashing water. The saw does not have a pump for forced water circulation. It uses passive water cooling.
What’s included:
- Blade Wrench
- PCE980 7in. Wet Tile Saw
- Miter Square
- 7 in. Porcelain Tile Blade
- Can be carried in hand (weight is 32 pounds);
- Rugged construction;
- Increased power of 1300 watts.
- You can’t change the table tilt angle.
5. SKIL 3550-02 — Tile Water Saw with HydroLock System
Specifications:
- Blade Length: 7 Inches
- Speed: 3600 RPM
- Bevel Capacity: at 0, 22.5 and 45 degrees
- Power Source: Corded Electric
- Voltage: 120 Volts
- Warranty: 3-year
The model SKIL 3550-02 is a popular 7″ wet tile saw, improved due to HydroLock technology. Its special design holds the water right near the entire disk. That means the disk is not just touching the water at the bottom but is completely deeped in a special plastic cover with water. Due to this technology, the slicing is faster and clearer.
The saw’s motor runs at 3,600 rpm, which makes the cut more precise. The saw’s design allows for comfortable tile angles of 0, 22.5, and 45 degrees.
What’s included:
- Bare-tool
- Manual
- Porcelain Tile Blade
- You can carry it in hand (the weight is 32 pounds);
- Rugged construction;
- Increased power 1300 watts.
- You can get wet while working with this saw.
6. SKIL 3601-02 — Flooring Saw with 36T Contractor Blade
Specifications:
- Blade Length: 4.375 Inches
- Speed: 11000 RPM
- Bevel Capacity: at 0, 22.5, and 45 degrees
- Power Source: Corded
- Voltage: 120 Volts
- Warranty: 1-year limited warranty on tool
SKIL 3601-02 is one of the most popular tile saw models from this American manufacturer. You should pay attention to the item if you opt for an inexpensive saw for cutting small and oversized tiles. This saw does not have a stand, so you can fix it right on the floor while you work. The saw blade is fixed at 0, 22.5, and 45 degrees. It features a contractor blade with a diameter of 4.375″.
What’s included:
- 3601 Flooring saw
- Contractor saw blade with 36 carbide tipped teeth
- Durable aluminum fence
- Vertical workpiece clamp
- Dust bag
- Reliable fixation of the work surface on the floor or table;
- You can connect a vacuum cleaner to collect dust;
- Convenient longitudinal tile clamps.
- No water cooling.
7. Leegol Electric 7″ — Most Compact Wet Tile Cutters
Specifications:
- Blade Length: 7 Inches
- Speed: 3550 RPM
- Bevel Capacity: 45ᵒ
- Power Source: Corded Electric
- Voltage: 120 Volts
- Warranty: 2-years
The item from Leegol Electric is a small 7-inch wet tile saw that is designed for cutting porcelain tile and other types of ceramic tile. There is a water tank under the work surface that is filled by itself. This saw model has several beneficial features. Among them, there is a rotating working surface of up to 45 degrees. It is not the disk that rotates but the surface where the tile lies. This is more convenient for the precise cutting of the finishing material.
The tool has compact dimensions of 18 x 15.75 x 6.75 inches. Despite its small size, the saw’s electric motor spins at 3,550 RPM. This results in a smooth, splinter-free joint on the tile.
What’s included:
- 7-Inch Tile Cutter
- 1 Spanner Wrench
- 1 Nut Driver
- 1 Instruction Manual
- Compact size;
- Water cooling;
- Rotatable surface for cutting tiles at an angle.
- Not suitable for large tiles.
Wet Tile Saw Buyer’s Guide
From this Buyer’s Guide, you will learn how to choose and use the right wet tile saw for your home or professional job. There are several aspects to consider to be satisfied with your future tool.
How to use wet tile saw?
The operation of the device is quite straightforward, but you should still take some factors into account to prevent any negative consequences. When cutting with a tile cutter, the following recommendations should be considered:
The passage should be made only in one direction. If you move the rotating disk in the opposite direction, it will lead to the formation of chips and other defects on the sawed material.
If the work is carried out on the machine with the top of the motor, it is necessary to move the disk manually. If it is a tile cutter with a lower motor, it is necessary to hold the tile with your hands while working. This method of cutting is less safe, so you need extra care and precise attention when working.
Prepare the equipment for work, install the disk, pour water, plug the equipment into the socket, and fix the workpiece.
How to choose the best-wet tile saw?
Learn how to choose the right wet tile saw with the main criteria in mind. These are important factors because it determines the usability of the saw, the smoothness of the cut, and the practicality of the saw.
Accuracy
Follow the wet tile saw manufacturer’s recommendations for high-precision tile cutting. The working principle is the same for all-electric tile cutters. The diamond disc attached to the platform is deeped in the water in the tray mounted on the tool. This avoids overheating and dusting. The resulting film protects the cut surface from cracking and the knife from rapid wear. Choose stable water-cooled torches for maximum cutting precision.
Blade quality
It is recommended to cut tiles with a diamond disc. The diamond disc will do the job neatly. It not only speeds up the cutting process but also does it very accurately. After cutting with such a wheel, the edges of the material are even, smooth, and rounded. Due to diamond discs and electric tile cutters, you can easily cut almost any finishing material, whether it is ceramic or porcelain tile. Another plus: they can make shaped cuts and strips less than 0.2 inches wide.
Tool dimensions
The important parameters of the wet tile saw are the maximum depth of the cut, disc diameter, and maximum cutting length (depending on the length of the working surface). If you intend to cut long tiles (porcelain or large-sized ceramic tiles), you should choose a tile cutter with a depth of cut greater than 2 inches and a cutting length of up to 36 inches. For compact tiles, a tile cutter with a cutting depth of up to 1.5 inches and a cutting length of up to 28 inches will work.
Extra features
For your convenience and the tools functionality, wet tile saws can have additional features:
- Cutting angle adjustment from 0 to 45 degrees;
- Rubber-coated work surface for clamping the workpiece securely;
- Smooth start and emergency blade brake;
- Increased water tank capacity;
- Automatic pump control;
- Comfortable handles;
Safety Tips
To cut tiles, you must not only buy an electric tile cutter but also learn how to work on it. To do this, you need to perform a number of the following steps:
- Prepare and connect the equipment;
- Wear protective gear, goggles, headphones, and gloves;
- Draw a marking on the workpiece, which is to be divided;
- Fix the tile on the table to prevent the vibration;
- Start cutting slowly and carefully;
- Do not put too much pressure with the disc on the material; otherwise, you might just squeeze it, ruining the tiling material;
- When you finish working, turn the equipment off. You should pick up the material only at this point.
Wet Tile Saw FAQ
Find the answer to your question about the peculiarities of using a wet tile saw in this Q&A section. I have collected the most common queries on the Web to clarify what may be still unclear to you.
Do I need a wet tile saw or manual tile cutter?
Hand-held tile cutters are compact and lightweight. They do not require connection to the power grid and are suitable for small amounts of work. Such a hand tool has several disadvantages. For example, it will not cut tiles thicker than 0.6 inches and stone. With a large volume of finishes, the hand saw is ineffective. The tool will cut for a long time, requiring a certain skill and physical strength.
Wet tile saws are used by professionals to work with tile and other facing materials. This is the best option for building a house and doing construction work.
What materials can a wet tile saw cut?
You can use a tile water saw to cut various materials:
- Ceramics;
- Marble;
- Tile;
- Granite;
- Concrete;
- Glass;
- Stone.
Note that very hard materials, such as granite and concrete, may require special diamond-coated discs. Diamond exceeds the hardness of all known materials and cuts tiles, natural and artificial stone, concrete, bricks, glass, ceramics, and porcelain effectively. The main thing is to choose the right disc and feed rate, then the tile bench saw can easily do the cutting.
What size of a wet tile saw should I pick?
When selecting the size of the wet tile saw, consider the working conditions and the required cutting depth. For cutting ceramic tiles and thin stone slabs, machines with a cutting depth of up to 1.8-2.3 inches are the best choice. Such machines are equipped with 6-12 inches discs. Consider also the length of the working surface of the saw. The longer the table, the longer the workpiece passes under the disc. For a tile machine, 24 inches on the parallel side and 18 inches on the diagonal is considered to be a good value.
Can I cut tile without a wet tile saw?
Yes, you can use a handheld tile cutter or a grinder to cut ceramic tiles. But these tools have many drawbacks. They can only be used for a small amount of work at home, where a perfectly even cut is not required.
Quick, Precise, and Clean Cuts
The best-wet saw will cut tile quickly and accurately. And no chipping or cracking! With the tips above, you can choose the right water-cooled tile cutting tool to get the material of desired size and shape. First, determine the cutting material and the working conditions. When choosing a ceramic tile wet saw, consider such parameters as the size of the working surface, disc diameter, cutting depth, the possibility of cutting at an angle, and motor power. Take into account all the details, so as not to make a wrong choice.
Please describe your experience with porcelain tile saw. What parameters did you consider when choosing? Are you satisfied with everything working with such a tool?
